Fracarro D-Matrix 4S Instructions D'emploi page 52

to reinstate the PID.
to change the PID.
NB: click on "Apply" to make the changes effective.
By clicking with the mouse on the "mux PID confi guration" keys under each mux output table,
the following screen opens:
The 2 small tables enable adding or deleting PID from the output mux.
In the fi rst table "Added PID list" you can: write the PID to add which is shown under the column
"remapped value", select the signal input (INPUT 1, INPUT 2, INPUT 3, INPUT 4, USB). Other "remapped value", select the signal input (INPUT 1, INPUT 2, INPUT 3, INPUT 4, USB). Other "remapped value", select the signal input (INPUT 1, INPUT 2, INPUT 3, INPUT 4, USB). Other
actions are also possible: add the PID
value of the added PID
In the second table "Deleted PID list", certain PID can be deleted from the output mux by In the second table "Deleted PID list", certain PID can be deleted from the output mux by
directly writing the PID to delete in the space, add it to the list
1, INPUT 2, INPUT 3, INPUT 4, USB). Later the deleted PID can be reinstated
removed from the deleted PID list.
NB: click on "Apply" to make the changes effective.
By clicking on the Advanced Confi gurations key, the following screen opens:
Fig. 12
, delete the added PID
and reset the changed PID
Fig. 13
52
and change the remapped
.
and select the input (INPUT
and therefore