Fracarro D-Matrix 4S Instructions D'emploi page 40

COMMON INTERFACE AND OUTPUT
COMMON INTERFACE: to set the parameters of the CAMs that are present.
CAM1/ CAM2
MODULE NAME: to verify the common interface module name.
ASSOCIATE TO: to associate the selected CAM to one of the 4 available INPUTS.
PROGRAMS: to add or remove the programs to be decrypted.
RESET CAM: to reset the CAM.
OUTPUT
DVBT-T -> DVB-C / DVB-C -> DVB-T: Switch DVB-T/DVB-C: to select the output signal standard,
choosing between DVB-T and DVB-C, according to the standard set, other specific parameters
40