Access Panels - Briggs & Stratton GC1031 GENSET Mode D'emploi

Access Panels

The generator is equipped with an enclosure that has two
access panels, as shown in the image that follow.
Front Panel (A) and roof (B) are used to access:
• Battery Compartment
• Engine Oil Drain Hose
• Engine Oil Filter
• Engine Valve Cover
• Spark Plugs
Each generator is shipped with a set of identical keys
fastened to the fuel solenoid (C).
16
Roof Removal
1. Remove the screws (A) that secure the roof to the unit.
2. Carefully lift and remove the roof from the unit.