Installation And Setting - Meister MFW300-1 Traduction Du Manuel D'utilisation Original

MW-5454300-Bediene-1602_(4) 18.02.16 09:36 Seite 53
unfavourable circumstances, this may
affect the functionality of medical
implants (e.g. pacemakers).
Before you use the power tool:
• Consult your doctor.
• Ask the manufacturer of the
implant.
Additional safety notes
NOTE: Risk of damage! Improper
handling can cause damage to
the multifunction tool. Do not place
the multifunction tool on or next to
hot surfaces (e.g. radiators).
Key to symbols
Read the operating
instructions!
Voluntary " Tested safety"
quality mark
The housing is double
insulated
Connection for the dust
extraction
The product complies with
the applicable European
Directives
Important! Wear safety
goggles!
Important! Wear ear
defenders!
Important! Wear a breathing
mask!
7 – Installation and setting
Check multifunction tool and scope
of delivery
NOTE: Risk of damage! Lack of
care in opening the packaging
with a sharp knife or other sharp
objects can damage the multifunction
tool. Take care when opening the
packaging.
1. Remove the packaging materials.
2. Check that the product package is
complete (see Figs. A and B).
3. Make sure that the multifunction tool
and accessories are not damaged. Do
not use the tool if it is damaged.
Please contact the manufacturer via
the service department address
shown on the warranty certificate.
Getting to know the operating
principle
The multifunction tool does not rotate
the attached tool, but moves it rapidly
back and forth (oscillation).
Getting to know the permitted
materials
You may work on the materials listed
below using the following tools:
Plunge-cut saw blade
• Hardwoods and softwoods
Scraper (not included in the scope of
delivery)
• Paint and varnish layers
• Plastic coatings
53