Introduction; Package Contents - Kerbl EquiAlarm 32450 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13

1. Introduction

Naturally, you want to be there when your mare is about to give birth, so that you can assist her or alert a vet if
there are any complications. Horses and ponies have a tendency to lie down, stretched out on their left or right flank
during the birthing process. This allows them more room during contractions. The EquiAlarm makes clever use of this
phenomenon. By simply fitting the EquiAlarm beneath the halter of your mare (or into an anti-roll girth), it will alert
you when the birth commences.

2. Package contents

1. The EquiAlarm transmitter.
2. The special holder. The EquiAlarm is slotted into this. This holder can be attached under your mare's halter, or
into the ring on the anti-roll girth.
3. Cable ties. In order to help you get started, we have supplied a number of cable ties (also referred to as „tie
wraps"). These cable ties are for once-only use, but can easily be obtained from any hardware store.
4. The special screwdriver. Firstly, this can be used to unscrew and open your EquiAlarm (for example when batte-
ries need replacing or when you need to insert/remove the SIM card). The rear of this screwdriver, however, con-
tains a strong magnet. You can use this to operate the EquiAlarm.
5. Documentation. You will find 2 documents enclosed with your EquiAlarm, specifically:
a. Quick start guide (brief, concise manual)
b. Troubleshooter (A checklist for use if you experience problems using the EquiAlarm)
25

Publicité

Table des Matières
loading

Table des Matières