The Interior Of The Equialarm; Inserting/Replacing The Batteries; Equialarm Housing; Inserting The Sim Card - Kerbl EquiAlarm 32450 Guide D'utilisation

5. The interior of the EquiAlarm

When you unscrew and open the EquiAlarm,
you will see the following major components:
1. Batteries
2. SIM card / SIM card holder
3. Status indicator
4. GSM indicator

5.1 Inserting/replacing the batteries

When replacing the batteries for your EquiAlarm, you must always use alkaline batteries (preferably "Duracell" or
"Panasonic") Use of rechargeable batteries is not recommended. Always replace all 3 batteries simultaneously! A
small screwdriver may be used to carefully remove the batteries, if you are unable to do this with your fingers.
The batteries must be inserted so that the negative pole of the battery is placed on the spring.
Always use new batteries at the start of the foaling season!
When the EquiAlarm will not be used for a longer period of time, for example after the
foaling season, you should remove the batteries to prevent leaking that will damage your
EquiAlarm.

5.2 EquiAlarm housing

The housing of the EquiAlarm has been designed so that it can only be screwed shut in one way. This ensures that
the status and GSM indicators are visible.

5.3 Inserting the SIM card

The SIM card must be slotted into the EquiAlarm with the chip facing downwards. Note also the diagonal side of the
SIM card. This should be to the front when the SIM card is inserted.
Push the SIM card into the holder until you hear a click. You can then release the SIM card. The SIM card is now
sitting in the holder and the EquiAlarm is ready for use. When you want to remove the SIM card from the holder,
carefully push on the SIM card until you hear a click. If you now release the SIM card, the SIM card will come for-
ward so that you can easily remove it.
28