Film Rewind - Konica AUTOREFLEX T3 Mode D'emploi

FILM REWIND

After a pre-determined number of pictures have been taken
on the film loaded in your camera, the film will be wound
back into the original cartridge.
If the back cover of your camera is opened without
rewinding the film, the film will be exposed to light and the
whole of the film will become useless.
• When the film wind lever no longer moves further after
the advance of the last frame of the film, do not try
forcibly to cock the lever. Put the lever back to the
original position.
54
1. Depress the Film Rewind Button (41) on the underside of
your camera. Once it is depressed, the button will remain
sunken.
2. Flip up the Film Rewind Crank (22) and turn it in the
direction indicated by an arrow mark on the crank. This
action will take the exposed film back into the cartridge.
3. The film rewind action comes to an end when there is a
sudden easing of the load on the film rewind crank. Avoid
the direct sunlight and open the back cover to take out
the cartridge.
The film counter will return to the original position "S"
when the back cover is opened.
• The film rewind button will also return to the original
position when the film wind lever is wound.