Multiple Exposure - Konica AUTOREFLEX T3 Mode D'emploi

MULTIPLE EXPOSURE

The Multiple-Exposure Lever (18) is situated under the
shutter speed dial. With this lever kept pressed down in the
direction indicated by the arrow mark, cock the film wind
lever, only the shutter will be charged but the film will not be
wound (nor will the film counter advance). This will make it
possible to expose one and the same frame of the film as
often as you want.
(1) Give the initial exposure.
(2) Cock the film wind lever with the multiple-exposure lever
kept depressed in the arrow marked direction.
(3) Give a second exposure.
Repeat this series of action as often as you want.
• For an easy manipulation, insert the nib of a ball-point
pencil into the hole at the center of the multiple-exposure
lever.
56