Time Zones; Imei Management - ASPERIUM Raptor Mode D'emploi

SETTINGS: TIME ZONES
To set the time zone on the handheld device to correspond with your country, proceed as follows:
1. Using button (1), move to the symbol (2) Settings.
2. Using the directional key (3), navigate to Time zones (4) and confirm by pressing OK (5).
3. Press OK (5) to open the list (6) and select the desired time zone with the directional key (3).
4. Confirm the desired time zone by pressing OK (5).
To accept the changed time zone, you must reboot the handheld device.
(2)
(1)
(5)
(3)
(4)
14
(6)
ASPERIUM RAPTOR – USER MANUAL
When you connect a transmitter to the handheld device for the first time, this will be saved automatically with its IMEI
number in a free address. You can pair up to three transmitters with the device.
To clearly differentiate between the transmitters, you can give each one a name, as follows:
1. Using button (1), move to the symbol (2) Settings.
2. Using the directional key (3), navigate to IMEI management (4) and confirm by pressing OK (5).
3. Using the directional key (3), select a field (6) with an IMEI number and confirm by pressing OK (5).
> You can now select a letter by pressing the directional keys (3) up or down.
> To move to the next or previous letter field, press the left or right keys (7).
> Press ESC (8) to delete a letter.
> Press OK (5) to save you completed entry.
> To delete a transmitter, select the respective transmitter (9) and press DELETE (1).
(8) (2)
(7) (1/7)
(5)
(3)
NOTE: Never delete the IMEI number of a falcon
which is in flight with a current transmitter. During
this period, messages from this falcon can no
longer be received or displayed. In this event,
reconnect the transmitter to the handheld device
to save the IMEI number again.
ASPERIUM RAPTOR – USER MANUAL
SETTINGS: IMEI MANAGEMENT
(4)
(6) (9)
(7) (1)
15