Find Way Back - ASPERIUM Raptor Mode D'emploi

NAVIGATING TO THE FALCON
In order to first get a rough idea of the position of your falcon on the map (5), set the focus using the directional key (1)
to SHOW POSITION ON MAP (3) and press OK (2).
This assumes that you already have up-to-date data from the falcon.
You can now view the position of your falcon on the map (5).
INFO: Using the key on the left-hand side of the handheld device, you can enlarge or reduce the scale of the map.
Close this dialogue box with Done (6) and then press the TRACK button (7) again.
(2)
(1)
(7)
(3)
To start navigation to the falcon, use the directional key (1) to move the focus to NAVIGATE TO FALCON (4)
and confirm with OK (2). Please ensure adequate GPS reception. The route is now calculated.
INFO: Please note that route calculation is only possible if the parts of the land in which you and the falcon
are located are covered by the map material stored on the NAVI MicroSD card.
Taking traffic into account, follow the navigation prompts.
28
(5)
(4)
(6)
ASPERIUM RAPTOR – USER MANUAL
RAPTOR is equipped with a FIND WAY BACK function. This offers you a reliable means of returning to your starting point
(for example your car) if you are on foot in unfamiliar terrain, for instance, tracking the falcon.
> Press FIND (1) or use the keys (2) to switch to the symbol
> Using the directional key (4), set the focus to SET START POINT (5) and confirm with OK (6).
Once the start point has been calculated successfully, you will be shown the positional data at the start time, complete
with date and time (7). At the same time, the SET START POINT dialogue box switches to DELETE START POINT.
You can delete the set start point at any time by using the directional key (4) to set the focus to DELETE START POINT (5)
and confirming with OK (6).
You can now be guided back to the start point using the arrow / bearings navigation (8).
During the bearing-taking process, hold the handheld device horizontally out in front of you.
You can also be guided back to the start point with street navigation.
Using the directional key (4), set the focus to NAVIGATE TO START POINT (9) and confirm with OK (6).
The NAVIGATE TO START POINT dialogue box then simultaneously switches to END NAVIGATION.
(3)
(2) (2)
(6)
(4)
(1)
ASPERIUM RAPTOR – USER MANUAL

FIND WAY BACK

(3) in the FIND WAY BACK dialogue box.
(5)
(7)
(8)
(9)
29