Technical Data; Handheld Device - ASPERIUM Raptor Mode D'emploi

POTENTIAL FAULTS WITH THE HANDHELD DEVICE
Fault Problem
The Transfer mode to transmitter function is The transmitter battery is dead.
not working.
No GPS reception.
No space found for the IMEI.
The time zone cannot be changed. The changed time zone only becomes active
after the device has been restarted.
36
Solution
First charge the transmitter's battery
(charging time around 1 hour).
If you have activated radius monitoring, you
will need GPS reception during the
configuration process.
Ensure there is GPS reception by moving to
where there is a clear view of the sky.
Your IMEI register already contains three
IMEI numbers.
You can receive a maximum of three IMEI
numbers with your device.
Delete any IMEI numbers that are no longer
required from your register via Settings
IMEI MANAGEMENT.
Switch the device off, wait 10 seconds and
then switch it back on again.
ASPERIUM RAPTOR – USER MANUAL

Handheld device

Data Specification
Voltage supply 5V ==, +/-5%, 2,000 mA
Dimensions 165mm x 85mm x 35mm
Weight Approx. 320g without batteries
Network GPS, IRIDIUM
Band 1575.42 MHz, 1616-1626.5 MHz
GPS module J2-Jupiter, SIRF-Star 4
GPS sensitivity -160 dBm
GPS accuracy At least +/-10m
GPS cold start 45 seconds
Car charger 12-24V input – 5V output
Mains charger 110-240V input – 5V output
Battery 3 x Panasonic/Sanyo, UR14500P Li-ion 3.7V, changeable
Storage temp. -40°C to +85°C (-40.0 °F to 185°F)
Operating temp. -20°C to +55°C (-4.0 °F to 131 °F)
Housing protection class IP54, with antenna screwed on and dust cover closed
on the electrical connections
Classification
ASPERIUM RAPTOR – USER MANUAL

TECHNICAL DATA

IC
UL
, , Safety, EMC, ESG, Middle East
37