LEGRAND DAKER DK Plus 5 kVA Manuel D'installation page 56

The UPS is in self-test mode. During the self-test mode, the UPS remains in stored energy mode
for some seconds. The display changes from fig. 3 to fig. 4.
Fig. 4
If the self test is successful, the display changes from fig. 4 to fig. 5 and then to fig. 6.
Fig. 5
Fig. 6
If the self test is not successful, the display changes from fig. 4 to fig. 7. An error code or error sta-
tus appears on the screen.
Fig. 7
6. The start-up procedure is completed. Make sure that the batteries are fully charged or that the
UPS has been connected to the input line for at least 8 hours before turning on the load brea-
kers.
56
4 Operation