Hach TL2350 Manuel D'utilisation De Base page 23

Message
Send data
Connect a receiving device.
Add sample IDs from list
No valid data found
Not able to read sampling
date.
The instrument cannot read
the Sample ID
Problem/Error: Incorrect
date
Possible cause: The wrong
date format.
The sample ID list full. Data
has not been added.
Examine the device connections. Set the Auto Send setting to off. Refer to
Configure the measurement settings
No sample ID file was found on the USB flash drive.
Make sure that the date and time format is dd.mm.yyyy hh:mm.
Examine the text strings. Refer to the expanded user manual on the
manufacturer's website.
Make sure that the date and time format is dd.mm.yyyy hh:mm.
Remove the sample IDs that are not used. Add a new sample ID.
Solution
on page 11.
English 23