Initial Setup - Dremel 3D45 Traduction De La Notice Originale

INITIAL SETUP

The first time you power on your Dremel 3D45 you
will be prompted to perform an initial setup of network.
Completing this process will give you access to
features such as remote 3D printing via local area
network connection, notifications of firmware updates,
and printer status monitoring. You will then be walked
through how to loading your first roll of filament and
how to properly level the build platform.
1. To complete initial setup, tap "Start" when prompted
on the initial setup screen. If you decline this setup
you can always setup network later.
2. If you choose "Start", 3D45 will automatically
connect to your ethernet or search for available
wireless networks.
3. Choose your wireless network using the
touchscreen. Use the arrows to scroll through the
list of available wireless networks. Tap on your
network name to accept it.
4. Enter your wireless network password and tap
"Done".
612