Touch Screen Icons - Dremel 3D45 Traduction De La Notice Originale

DREMEL DIGILAB 3D45
FIRMWARE VERSION V1.0
USAGE COUNTER: 000
PRINTER STATUS: XXXX
ETHERNET MAC: 00:00:00:00:00:00
WIFI MAC: 00:00:00:00:00
ETHERNET IP: 000.000.000.000
NETMASK: 000.000.000
GATEWAY: 000.000.000.000
DNS: 000.000.000.000
!
!
Indicates that there is an error such as filament empty or door open.
!
!
!
Indicates that Ethernet is connected.
Indicates WiFi signal strength and if connected to WiFi symbol will be blue.
Indicates that the extruder and build platform are cool.
Indicates that the extruder and build platform are warm.
Indicates that the extruder and build platform are hot.
!
LICENSE

TOUCH SCREEN ICONS

611
ABOUT
Tap to see 3D45 information such as firmware
version, usage counter, printer status, and MAC
address.