Property Damage And Personal Injury; Touch Screen - Dremel 3D45 Traduction De La Notice Originale

Using your Dremel 3D45 without a computer is easy with the onboard software and full colour touch screen.
Before building your model we want to familiarize you with the touch screen menu structure and options.
OBSERVE ALL PROVIDED WARNINGS AND SAFETY INSTRUCTIONS WHEN USING THE
WARNING
!
DREMEL 3D45. FAILURE TO DO SO MAY RESULT IN FIRE, EQUIPMENT DAMAGE,
PROPERTY DAMAGE OR PERSONAL INJURY.

TOUCH SCREEN

BUILD
Tap to select a 3D model and begin build
process. (See page 27 for detailed build
instructions)
BUILD MENU
Tap Printer, USB Flash Drive, or Print Queue to
choose the destination of your desired file.
MODEL MENU
Tap to select the desired model or use arrows to
scroll through pages to find your model.
FILE DETAILS
Nozzle and plate temperatures settings
referenced for the current build.
BUILD – Tap to begin build process.
DELETE – Tap to remove model file from on-
printer storage or USB flash drive.
COPY TO PRINTER – From USB flash drive,
tap to copy model file to on-printer storage.
BUILD STATUS
STOP – Tap to cancel the current build process.
PAUSE/PLAY – Tap to pause or resume the
current build process. Pause will allow you to
access the filament button.
12