Yamaha VMX17 2009 Manuel De Montage page 4

UNPACKING
1. Remove the frame cover (1).
To remove the frame cover, cut the plastic
bands around the cover using a cutter or
scissors.
2. Remove the handlebar holder bolts (2).
2
A. Right
B. Left
3. Remove the packing frames (3). (Lift
up and then move to the side.)
Remove the bolts while holding the frame.
3
3
4. Remove the front wheel axle holder
bolts (4).
Before starting the assembly, check for
damaged or missing parts. Check both the
parts contained in the carton boxes and on
the vehicle for damage, scratches, and oth-
er defects.
1
2
3
3
4
-1-