Recording Measurement Results (Mem); Recalling Recorded Values (Mr); Erasing Recorded Values - Chauvin Arnoux C.A 6456 Notice De Fonctionnement

3.4

RECORDING MEASUREMENT RESULTS (MEM)

IMPORTANT - Each measurement stored in the instrument is identified by 2 indices: an OBJ no. and a
TEST no.; a given object (OBJ) generally contains several TEST nos.
For example: an OBJ no. can be used to locate an installation, and the TEST nos. identify the various
measurements made on this installation.
At any time, the user can store the result of a measurement and all of the parameters associated with the
measurement: date, time, type of measurement, measurement parameters, etc.
The location proposed by default is the first free memory location.
measurement
to be stored
03 06
OBJ TEST
(1)
FrEE
mesure
mémorisée
1)
"FrEE": the selected memory location is free / "OCC": the selected memory location is occupied
(2)
whether the location selected is occupied or not (previously recorded values are overwritten)
Note : Up to 100 measurements can be stored (e.g. 10 objects each having 10 tests, or any other combination).
3.5

RECALLING RECORDED VALUES (MR)

2 nd MEM
+
MR
The group of measurements (OBJ) and the measurement (TEST) to be retrieved on the display unit are
selected using the and
3.6

ERASING RECORDED VALUES

.
The memory of the instrument can be erased, totally or partially, in the SET-UP rotary switch position:
www.electronicaembajadores.com
MEM
selection of storage address using the following keys :
and
storage at the
selected address
keys.
52
(2)