Setting Mode; Audible Signals; First Use - AEG Electrolux FAVORIT 88012 VI Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• activation/deactivation of the rinse aid dispenser when Multitab function is active,
• activation/deactivation of the audible signals.

Setting mode

The appliance is in setting mode when the lights of the programme selection buttons are
on and 2 horizontal lines (- -) are visible in the digital display.
Always remember that when performing operations such as:
• setting the water softener
• activating/deactivating the rinse aid dispenser
• activating/deactivating the audible signals
the appliance MUST be in setting mode.
If the lights of the programme selection buttons are on and the time duration (in minutes)
of a programme is visible in the digital display, the last performed programme is still set.
In this case, to return to setting mode, the programme has to be cancelled.
To cancel a set programme or a programme in progress : simultaneously press and
hold the two RESET buttons (B and C) until 2 horizontal lines will appear in the digital
display. The programme has been cancelled and the machine is now in setting mode.

Audible signals

Audible signals have been introduced to help indicate which operations the appliance is
performing:
• setting the water softener
• end of the programme
• intervention of an alarm due to malfunction.
Factory setting: audible signals activated.
It is possible to deactivate the audible signals, using the function buttons.
1. Press the on/off button. The appliance must be in setting mode.
2. Simultaneously press and hold function buttons B and C , until the light of the function
buttons A , B and C start flashing.
3. Press function button C , the lights of buttons A and B turn off while the light of
function button C goes on flashing. The digital display indicates the current setting.
= Audible signals deactivated
= Audible signals activated
4. To change the setting, press again function button C : the digital display will indicate
the new setting.
5. To memorize the operation, switch off the dishwasher.

First use

Before using your dishwasher for the first time:
• Ensure that the electrical and water connections comply with the installation instruc-
tions
• Remove all packaging from inside the appliance
39
First use

Publicité

Table des Matières
loading

Table des Matières