Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
USING THE DETERGENT
B
A
30
20
SETTING AND STARTING A
PROGRAMME
Setting mode
The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation:
• All the programme indicators come
on.
If the control panel shows other condi-
tions, press and hold function buttons
(B) and (C) at the same time until the
appliance is in setting mode.
Starting a programme without
delay start
1. Open the water tap.
1. Press the release button (B) to
A
open the lid (C).
-
+
2. Put the detergent in the compart-
ment (A) .
3. If the programme has a prewash
C
phase, put a small quantity of de-
tergent on the inner part of the ap-
pliance door.
4. If you use detergent tablets, put
the tablet in the compartment (A).
5. Close the lid. Make sure that the
release button locks into position.
2. Press the on/off button to activate
the appliance. Make sure that the
appliance is in setting mode.
3. Set the programme.
• The related programme indicator
• The programme duration flashes
4. Close the appliance door. The pro-
gramme starts.
• If you open the door, the display
Starting a programme with
delay start
1. Set the programme.
CAUTION!
Use only detergents for dish-
washers.
Do not use more than the cor-
rect quantity of detergent. Refer
to the instructions on the deter-
gent packaging.
Detergent tablets do not fully
dissolve with short programmes
and detergent residues can stay
on the dishes.
We recommend that you use
detergent tablets with long pro-
grammes.
comes on.
in the display.
shows the programme duration
that decreases with steps of 1 mi-
nute.
ENGLISH
33
Publicité
Table des Matières
