BH S1UiB Guide D'utilisation page 18

STEP 5
1. Connect the Computer Cables (H-1) and hand pulse wire (M-4) to computer (A). Then
attach the Computer (A) to the Computer bracket with the enclosed Screws (A-1).
2. Remove the pre-installed Screws (H-2) on the handlebar post and set aside.
3. Pass the R/L Cover (M-6 & M-7) through the Handlebar (M).
4. Attach the Right and Left cover (M-6 & M-7) using Screws (H-2) and Screws (H-1).
5. Take the pre-installed Screws (H-2) from the handlebar post, and then assemble the
Bottle cage (H-4) and mount with Screws (H-2).
18