BH S1UiB Guide D'utilisation page 16

STEP 3
1. Remove the Bolts (E-2) and Flat Washers (E-1) from the Main Frame (G-26)
2. Take the Handlebar Post Cover (G-24) and slide it onto Handlebar Post (H)
3. Hold the Handlebar post (H-3) and connect the Lower computer cable (G-20) to the
Upper Computer Cable (H-1)
4. Slide the Handlebar Post (H-3) into the Main frame (G-26) - allign the holes then insert
Bolts (E-2), Flat Washers (E-1) and Curved Washers (E-3). Tighten the screws to secure
the Handlebar Post (H-3) with Allen key (N-11). Slide the Handlebar Post Cover (G-24)
down to cover the screws.
16