BH S1UiB Guide D'utilisation page 15

STEP 2
1. Install the Right Pedal (G-4R) onto the right crank by turning clockwise. Install the Left
Pedal (G-4L) onto the left crank by turning counter-clockwise. Use N-10 Screw Driver
provided to tighten pedals securely.
2. Make sure Knob (G19) is loosened, then pull the knob out and insert Seat Post (K) into
the Main Frame (G-26). Choose the desired position and released the knob, adjust up or
down until you hear a "click", then tighten the knob to secure the position.
3. Slide the Seat (G-12) onto the Seat slider (L). The seat can be adjusted to different angles.
Tighten the two Nuts under the Seat using the box spanner (N-12). In addition, the Slider
can be adjusted horizontally by loosening the knob below the Seat Slider and slide the Seat
Slider to the desired position. Tighten the knob after setting the desired position.
15