Checking Rotational Direction Of; Blade Discs; Change Rotational Direction Of; Cleaning The Machine - Stihl GHE 150 Manuel D'utilisation

● Press the green button (1) on the switch
(illus. shows GHE 150, GHE 250,
GHE 250 S).
The garden shredder starts up.
Only begin to feed the shredding
material once the motor has
reached the maximum speed (idling
speed).
10.4 Switching off the garden
shredder
Risk of injury!
Do not step into the ejection area
when switching off!
Stand to the side of the machine to
do so.
Beware of the work tools running
on for several seconds before
coming to a standstill after
switching off the motor.
● Press the red button (1) on the switch
(illus. shows GHE 150, GHE 250,
GHE 250 S).
The garden shredder motor is switched off
and braked automatically.
Only switch off the motor when
there is no longer any shredding
material in the machine. Otherwise,
the blade disc may become blocked
when operation is resumed.

10.5 Checking rotational direction of

blade discs

On models GHE 260 and
GHE 260 S, the rotational direction
of the blade disc must be checked
before commencing work (feeding).
42
Risk of injury!
Always wear safety glasses when
performing the check.
● Switch on the garden shredder.
( 10.3)
● Switch off the garden shredder.
( 10.4)
● Press the splash guard inwards and
look at the blade disc from above
through the feed opening:
The correct rotational direction of the
11 blade disc is anti-clockwise.
10.6 Change rotational direction
of blade disc
In the case of incorrect rotational
direction (clockwise) of the blade
disc, the rotational direction must
be changed on models GHE 260
and GHE 260 S.
The rotational direction of the blade discs
can be changed by reversing the polarity
of the phase rotation device on the mains
plug.
● Using screwdriver (U), turn phase
rotation device (1) 180° anti-clockwise
or clockwise until it engages.
10.7 Shredding
● Push the garden shredder onto firm and
level ground and set down safely.
● Put on thick gloves, safety glasses and
hearing protection.
● Open the discharge flap. (
● Connect the power cable of the garden
shredder.
● Start the garden shredder. (
● Wait until the garden shredder has
reached its maximum speed (idling
speed).
● Feed the garden shredder with
shredding material in the correct way.
( 8.8)
● Switch off the garden shredder.
( 10.4)
11. Maintenance
Risk of injury:
Carefully read the section "For your
safety" (
12
subsection "Maintenance and
repairs" (
safety instructions exactly before
performing any maintenance or
cleaning operations on the
machine.
Disconnect the mains plug before
performing any maintenance
operations.

11.1 Cleaning the machine

Maintenance interval:

After each use
Clean the machine thoroughly each time it
has been used. Care of the machine will
protect it against damage and extend its
service life.
Electric motors are splashproof.
Protect shredding tools, incl. the shredding
chamber using a commercially available
7.3)
anti-corrosion agent (e.g. rapeseed oil).
It is only permitted to clean the machine in
the position shown.
10.3)
4.), particularly the
4.7), and follow all
13
0478 201 9913 B - EN