Safety-Relevant Accessories - Dustcontrol DC 1800 H EX Notice Originale

Service
Caution
The manufacturer or a trained person must carry
out an inspection at least annually, e.g. damage to
the fi lter, air-tightness of the dust-extraction ma-
chine and the function of the control unit.
The vacuum producer has an extremely long
service life and requires no maintenance. After
approximately 1,000 operating hours, the seals
should be inspected. If wear is detected, these
parts must be replaced.
Safety-relevant accessories included
Description
Fine fi lter, polyester
DC 1800/2800 H EX
HEPA fi lter DC 1800/2800 H EX
Suction hose 38, ESD-certifi ed
Coupling socket 50/38
ESD-certifi ed
Connecting sleeve 38/38 turnable
ESD-certifi ed
Intermedia sleeve 50/38,
ESD-certifi ed
Inlet plug
Plastic bag DC 2800 H EX
Plastic bag DC 1800 H EX
Engine cooling air fi lter
Floor nozzle 370 A-38 ESD-certifi ed 7235E
Warranty
The warranty period for this machine is one years
and covers manufacturers faults. The warranty is
valid under the condition that the machine is used
under normal conditions on the task for which it was
designed and is maintained properly.
We can supply all safety-relevant spare parts
Part no
and wearing parts, see page 63, Dustcontrol
Worldwide, for local agent.
42028H
See the Dustcontrol catalogue for other ac-
42027H
cessories.
2027E
2108E
2114E
2120E
42250H
42384H
42951H
432199H
Normal wear is not covered by this warranty. Service
performed by other than Dustcontrol or its authorized
agent voids automatically the warranty. No other
warranty express or implied is applicable.
DC 1800/2800 H EX - 17 Part No 94169-F