Care And Maintenance - LEXIBOOK HPl500 Manuel D'instructions

4.) Depress the Date/Month button. The display will change from 'time' to
'month/ date'(mm/dd).
While holding the Date/Month button, press the Tuning/Skip button to set
the display to the correct Month and Date. The Day indicator will change
automatically as you adjust the month/date settings. When the correct Month
and Date appear on the display, release the buttons.
5.) Depress the Time button and the Tuning/Skip button to set the display
to the correct Time. Be sure to confirm that you have set the time correctly to
'AM'or 'PM'by observing the AM indicator.
6.) After you set the time, reconfirm that the Day, and Month/Date displays are
still correct. Make final adjustments if necessary.
The SmartSet® clock memory is now reset and the new lithium battery will
maintain it for the next 5 to 8 years, depending on the number and duration of
the power outages you experience.
IMPORTANT NOTE:
After resetting the clock, don't forget to reset your wake up times, and alarm
mode settings, and sleep timer settings as well.

CARE AND MAINTENANCE

If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes
smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow water
or any liquid to get inside the cabinet.
Never use any abrasive cleaners or cleaning pads as these will damage the
finish of your unit.
Lithium Battery Precautions
• Dispose of the old battery properly. Do not leave it lying around where a young
child or pet could play with, or swallow it. If the battery is swallowed, contact a
physician immediately.
• Battery may expolde if mistreated. Do not attempt to recharge it or
disassemble it. Do not dispose of the old battery in a fire.
71
HPI500FR-GBIM0236.indd 71 09/06/2006 16:38:41