LEXIBOOK HPl500 Manuel D'instructions page 68

Phones (Stereo Headphone) Jack
This system includes a stereo headphone jack for private listening without
disturbing others. The Phones jack is located on the back panel. The built in
speakers automatically shut off when headphones are connected to the Phones
jack.
IMPORTANT: Before connecting your headphones, set the Volume control to a
low level. Then connect your headphones, put them on and gradually increase
the volume to a comfortable listening level.
Remember that music files can often contain very loud passages as well as
softer passages. It is a good idea to adjust the listening level during a louder
passage so that you are not surprised by a sudden, uncomfortable increase in
the headphone sound.
CHANGING THE LITHIUM BATTERY
Like all batteries, eventually the built in lithium battery will need to be replaced.
A number of factors, such as, the length of time between the date the radio was
manufactured and the date you plugged it in for the first time determine the
amount of time before replacement.
During this initial storage period, the lithium battery is supplying power to the
SmartSet® computer memory. Once you plug the radio in, your household
outlet supplies the power, and the battery is not being used.
A fresh lithium battery can supply power to the SmartSet® computer for at least
3 years even if it is never connected to an AC power supply. If your radio was
connected to your AC supply within a few months after it was manufactured,
and you experience only the normal, nuisance type, short duration power
interruptions, your battery may last for up to 5 years or even longer.
When the battery power drops below a certain level the " low" indicator will
'flash'. When you see this indicator, you should change the battery as soon as it
is convenient for you to do so. To change the battery proceeds as follows:
1.) Purchase a replacement 3V lithium battery wherever batteries are sold.
The battery type is CR2430 or equivalent.
2.) Remove the battery from its package so it is ready to install.
68
HPI500FR-GBIM0236.indd 68 09/06/2006 16:38:38