LEXIBOOK HPl500 Manuel D'instructions page 55

3.) Press the Memory button again. The "F 1" stops flashing. This indicates that
FM 92.5 is now stored in FM Preset Memory #1.
4.) Tune to the next station that you wish to store.
Press the Memory button once, and then press the Preset button to select
Preset Memory #2. "F 2" begins flashing in the display.
5.) Press the Memory button again to enter your desired station in Preset
Memory #2.
6.) Repeat steps 4 and 5, using the Preset or buttons to select a different
preset memory number each time until you have stored up to 10 FM stations in
the memory.
7.) Press the Band button to switch to the AM band and repeat the above
procedure to store up to 10 AM stations in the tuner memory.
NOTES:
•The FM memories are numbered "F 1" through "F 10". The AM memories are
numbered "A 1" through "A 10".
• After you press the Memory button the first time you must select a Preset
Memory number and press the Memory button again within 10 seconds, while
the memory number is flashing, or the station will not be memorized.
55
HPI500FR-GBIM0236.indd 55 09/06/2006 16:38:26