Alarm Operation - LEXIBOOK HPl500 Manuel D'instructions

8) The Play/Pause buttons on the top panel of this system and the remote
control have the same function as the Play/Pause button on your iPod®.
Press once to begin playback. Press again to pause playback. Press and hold
to shut the iPod® 'Off'.
9.) When you have finished listening to your iPod® you may press the
Function button to switch to the Tuner function. Your iPod® will shut off
automatically. You may also press the Power button to shut this system 'Off'.
Your iPod® will shut off and the recharging circuit turns on automatically. If you
remove your iPod® from the docking connector we suggest that you close the
docking compartment cover again to keep dust and other foreign objects out of
the docking area.
NOTES:
If you remove your iPod® from the docking connector during playback the
power to this system is shut 'Off' automatically.
If you have a power failure while the iPod® is playing, the iPod® power will be
shut off automatically to preserve the iPod® internal battery.

ALARM OPERATION

The dual alarms in this system give you the option of waking to the radio, an
electronic buzzer tone, or even to your iPod®.
You may also program one or both of the alarms for weekdays only, weekends
only, or everyday operation.
Before activating the alarms first check the settings for Alarm 1 and Alarm 2 and
adjust if necessary.
Refer to "Adjusting The Wake Up Times" and "Selecting The Alarm Mode"
on pages 17 and 18.
Wake To Radio
1.) Tune to the station that you want to wake you up, adjust the Volume control
to the desired level, and then shut the system 'Off'.
60
HPI500FR-GBIM0236.indd 60 09/06/2006 16:38:33