LEXIBOOK HPl500 Manuel D'instructions page 59

Or that the USB plug your iPod® shuffle inserted into the USB port in the
docking area. If necessary set the Hold switch on your iPod® to the 'Off'
position.
4.) Press the Power button on the top panel or remote control to turn this
system 'On'. Depending on the setting of the Back Light Timer in your iPod® the
display backlighting may turn 'On' and the "Charging" or "Charged" indicator
will appear in the display.
5.) Press the Function button on the top panel or on the remote control to
select the iPod function.
Your iPod® will begin to play. It may begin playback with the first song in your
library in alphabetical order by song name, or if the iPod® was only shut off for
short time it may begin playback of the same song that was playing before it
was shut off.
NOTE: If the Power of this system is 'On' and the iPod function is already
selected then your iPod® will begin to play as soon as it is connected to the
dock, as long as the iPod® HOLD switch is 'Off'. If your iPod® enters the Pause
mode when you connect it to the dock, press the Play/Pause button to
begin playback.
6.) Once the iPod® is playing you can use the navigation controls on the iPod®
to select among the menu items as usual. However you can only adjust the
volume level by using the Volume +/– controls on the top panel or remote
control of this unit. The click wheel volume control on the iPod® cannot be used
to control the speaker volume level of this system.
7.) To skip or search forward or back to the next or previous song you can use
the Tuning/Skip or buttons on the top panel or the / buttons on the
remote control.
59
HPI500FR-GBIM0236.indd 59 09/06/2006 16:38:33