LEXIBOOK HPl500 Manuel D'instructions page 53

Listening To The Radio
1.) Press the Power button on the top panel or remote control to turn the
system 'On. If necessary press the Function button on the top panel or remote
control to select the Tuner function. The TUNER indicator appears and the
display changes from time to radio frequency. The first time you turn your unit
'On' the display will show FM 87.5 MHz.
2.) To switch between the FM and AM bands press the Band button on the top
panel or remote control. The first time you select the AM band the display will
show AM 520 KHz.
3.) Tune to the desired station with the Tuning/Skip or buttons on the top
panel or the / buttons on the remote control as follows:
Manual Tuning
Repeatedly press either the Tuning/Skip or buttons on the top panel or the
/ buttons on the remote control until the display shows the frequency of
the desired station.
Automatic Tuning
Depress and hold either the Tuning/Skip or buttons on the top panel or
the / buttons on the remote control until the display begins to move and
then release the buttons. The tuner searches up or down the band for the next
strong station and then stops. Repeat this process until the tuner stops on the
desired station.
4.) If you tuned to an FM Stereo station the FM ST. indicator appears in the
display.
53
HPI500FR-GBIM0236.indd 53 09/06/2006 16:38:25