saro SVM Manuel D'utilisation page 58

BEDIENUNGSANLEITUNG/ USER MANUAL/ MANUEL D'UTILISATION
PROBLEM
The vacuum bag is
not properly and/or
correctly sealed.
In the case of other problems or questions contact the supplier or SARO .
Version 12.10 Art. 0894552
CAUSE
•
The vacuum bag is being placed
incorrect on the sealing bar.
•
The sealing time is too long or too short.
•
The silicone rubber in the silicone holder
is damaged or worn.
•
The Teflon tape is damaged.
•
The inside of the vacuum bag opening is
contaminated or greased.
SOLUTION
•
Place the vacuum bag neatly and
smoothly on the sealing bar. Ensure that
the opening of the bag is always within
the vacuum chamber.
•
Adjust the sealing time longer or shorter.
•
Replace the silicone rubber.
•
Replace the Teflon tape
•
Clean the vacuum bag's opening.
Saro
58