Control Panel Layout - saro SVM Manuel D'utilisation

BEDIENUNGSANLEITUNG/ USER MANUAL/ MANUEL D'UTILISATION
CONTROL PANEL
CONTROL PANEL VERSION
Digital time control

CONTROL PANEL LAYOUT

1. Display
Displays the status of the active function during the run of the program cycle or the set value of the selected function
when machine is not running.
2. FUNCTION SELECTION Key
Select function (vacuum or seal) for viewing or changing function values. The function is selected if the function light is
on in front of the function description under the display.
3. CONDITIONING PROGRAMME Key
Start the conditioning program for pump (duration 15 minutes). For instructions on the program, see page 15.
4. FUNCTION Lights
A light in front of the function indicates that the function is active during the program cycle or that the function is selected
for view or change.
5. + / STOP VACUUM Key
Function during cycle
General function.
6. - / STOP Key
Function during cycle
General function
Version 12.10 Art. 0894552
The digital control is implemented with a function program that can be set with different
function values per cycle (to be able to pack different products). A program cycle is the
complete program of set functions (vacuum and seal) that the machine runs through to
package a product.
The control panel is implemented standard with a conditioning program for the regular
maintenance of the pump and two STOP keys for complete function interruption or for only
active function interruption. There are also a number of built-in service programs. Contact the
supplier or SARO for more information about these functions.
The value of the functions can be set for a certain time period.
The vacuum function can be set to whole seconds with a maximum of 99 seconds.
The seal function can be set with an interval of 0.1 seconds and a maximum of 6.0 seconds.
2
3
Interruption of the active function during the program cycle. The cycle immediately
continues with the next function.
Increment the value of the selected function.
Terminates the program cycle completely. The cycle immediately switches into the
ventilation function.
Decrement the value of the selected function.
1 5
4
6
4
sta
Saro
0,6
0,4
0,8
0,2
7
-1
0
41