saro SVM Manuel D'utilisation page 34

BEDIENUNGSANLEITUNG/ USER MANUAL/ MANUEL D'UTILISATION
PRIOR TO STARTING TO USE THE MACHINE,
MACHINE REGISTRATION TO BE COMPLETED BY THE USER
Register the machine using the following data. This information is necessary if the supplier or SARO is contacted
concerning questions or references about the specific machine.
DATA ON MACHINE TAG
Relevant data for answering questions can be found on the machine tag. The machine tag is located at the rear of the
machine. Note down the following data:
CONTROL PANEL DATA
When starting the machine two codes first appear on the display in succession before control switches to user mode.
The first code indicates the software version of the control software and the second code indicates the options active.
Write both codes in the space below:
4. CODE 1
5. CODE 2
Version 12.10 Art. 0894552
1. MACHINE TYPE
2. MACHINE NUMBER (MACHINE NO.)
3. VOLTAGE (TENSION)
Saro
34