Vacuum Pump; General Maintenance - saro SVM Manuel D'utilisation

BEDIENUNGSANLEITUNG/ USER MANUAL/ MANUEL D'UTILISATION

VACUUM PUMP

Check before starting the machine if there is oil in the pump (see page 46). NEVER start the machine without oil in
the pump.
Use the right type of oil for the pump (see page 46).
After moving and/or transporting the machine, always first check the oil level before re-starting operation.
When starting the machine for the first time or after a lengthy idle period first run the conditioning programme before
operating the machine (see page 45).
IMPORTANT FOR OPERATION !!! READ THIS FIRST !!!
GENERAL
Never pack products that can be damaged during or after vacuum packaging. Live oats may never be vacuumed.
Refer to this manual if in doubt as to the operation and/or functioning of the machine. If the manual does not offer a
solution consult the supplier or SARO .
The guarantee and/or liability expires if damage is caused by repairs and/or changes made by you. In the case of
malfunctions contact the supplier or SARO .
In the case of malfunctions always stop the machine and remove the power cable from the wall socket.

GENERAL MAINTENANCE

It is essential that the machine is serviced regularly to guarantee operation and to keep the machine in optimal
condition. The maintenance schedule is clearly defined on page . The guarantee automatically expires due to
overdue or sloppy maintenance.
Always remove the power cable from the wall socket for maintenance work, the machine must be completely
disconnected.
If there are doubts about the maintenance activities or if the machine fails to work correctly always contact the
supplier or SARO .
Version 12.10 Art. 0894552
Saro
36