Philips MX5100VR Manuel Du Propriétaire page 9

MX5100VR.qxd 6/04/2004
Connecting the Cable Box/Satellite Receiver to the System and to a TV
This connection will let you use the features of both the VCR and the DVD Player.
ANTENNA IN
1
Connect a Cable TV or Satellite signal to the IN jack on the Cable Box/Satellite Receiver.
2
Use an RF coaxial cable to connect the OUT Jack on the Cable Box/Satellite Receiver to
the System's TV ANTENNA IN jack.
3
Use a second RF coaxial cable (one is supplied) to connect the System's TV ANTENNA
OUT jack to the TV's Antenna In jack.
4
Set the P/I PROGRESSIVE switch on the rear of the System to I (Interlace).
5
You are ready to connect the AM and FM antennas and the Speakers. Go to pages 16-17 to
connect these items.
6
When all connections are complete, plug in the power cords of the TV, Cable Box/Satellite
Receiver, and the System.
7
Set your TV to channel 3.
channel to channel 4. See step 6 on page eight for details.
8
If you have not turned on the System already, go to page 19 to complete the VCR's First-
Time Setup.
With this connection . . .
Select TV channels at the Cable Box/Satellite Receiver, not the System.To record or view TV channels:
1) Press VCR to put the System in VCR mode.The red VCR light will appear on the front of the System.
2) Press SKIP i /CH o or SKIP j /CH p to set the System to the Cable Box/Satellite Receiver
output channel (03 or 04).
3) Set the TV to the System's output channel (03 or 04).
4) Select the channel you want to view/record at the Cable Box/Satellite Receiver.
You may not view a channel other than the one you are recording.
Program a timer recording for one channel at a time. Set your Cable Box/Satellite Receiver to the channel
you want to record.When you enter the channel you want to record in a timer recording, select channel 03
or 04 (the Cable Box/Satellite Receiver output channel). (This is step 8 on page 39.) Leave the Cable
Box/Satellite Receiver on for a timer recording.
• If your Cable Box/Satellite Receiver has Audio/Video Out jacks, use audio/video cables to connect them to the
AUDIO and VIDEO (VCR IN) jacks on the System.You will not need the RF coaxial cable as described at step 2.
3:37 PM Page 9
OUT
DVD/
OUT
VCR
RF IN
If you cannot use channel 3 at your TV, you can change the System's output
Hookups (cont'd) 9
OUT IN
IN
TV ANTENNA AM
COMPONENT
VIDEO R AUDIO L VIDEO OUT
VCR Y
Pb/Cb
IN
FM
Pr/Cr
(75Ω)
S-VIDEO DIGITAL
AUDIO OUT
COAXIAL
OUT
P I
PROGRESSIVE
Helpful Hint
FL
FR
C
SL
SR
W
SPEAKER (4Ω)