Philips MX5100VR Manuel Du Propriétaire page 11

MX5100VR.qxd 6/04/2004
Connecting the System to a TV that has Audio and Video In jacks
This connection will let you use the features of both the VCR and the DVD Player.
1
Connect the antenna or Cable TV signal to the System's TV ANTENNA IN jack.
2
Connect the red and white audio cables (supplied) to the red and white AUDIO
(DVD/VCR OUT) jacks on the System and to the red and white AUDIO IN jacks on the
TV. Match the cable colors to the jack colors. If the TV has a single AUDIO IN jack, use the white
audio cable to connect the System's white AUDIO L (left) (DVD/VCR OUT) jack to the TV's AUDIO
IN jack.You will not use the red cable.
3
Connect the yellow video cable (supplied) to the System's yellow VIDEO (DVD/VCR
OUT) jack and to the VIDEO IN jack on the TV.
yellow and may be labelled CVBS, Composite, or Baseband video.
4
Set the P/I PROGRESSIVE switch on the rear of the System to I (Interlace).
5
You are ready to connect the AM and FM antennas and the Speakers. Go to pages 16-17
to connect these items.
6
When all connections are complete, connect the power cords of the TV and the System
to a power outlet.Turn on the TV and set it to the Audio/Video In channel.
right Audio/Video In channel, turn on the System. Press DVD to put the System in DVD mode.With
no Disc in the Player, a large DVD logo will appear on the TV screen when you get the TV on the
correct Audio/Video In channel. Go to your lowest TV channel (01 or 02), then change channels
down until you see the DVD logo.
7
If you have not turned on the System already, go to page 19 to complete the VCR's
First-Time Setup.
3:37 PM Page 11
VIDEO IN
RIGHT AUDIO IN
LEFT AUDIO IN
VIDEO IN
RIGHT AUDIO IN
LEFT AUDIO IN
This process sets up the TV channels and the language for the VCR menu.
Hookups (cont'd) 11
or Cable TV
OUT IN
TV ANTENNA
COMPONENT
VIDEO R AUDIO L
VIDEO OUT
DVD/
VCR Y
OUT
VCR
Pb/Cb
IN
FM
Pr/Cr
(75Ω)
DIGITAL
S-VIDEO
AUDIO OUT
COAXIAL
OUT
P I
PROGRESSIVE
The VIDEO IN jack on the TV is usually
Antenna
Signal
AM
To find the