Philips MX5100VR Manuel Du Propriétaire page 39

MX5100VR.qxd 6/04/2004
5
Press o or p until the month appears beside DATE.
Then, press B.
Next, press o or p until the day appears.Then, press
B. The day of the week will appear. You cannot record more
than one year in advance.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
START TIME
END TIME
CHANNEL
REC SPEED
6
To enter the recording's start time, press o or p until the
hour appears beside START TIME. Press B.
Press o or p until the minute appears. Press B.
Finally, press o or p to point to AM or PM. AM or PM
will flash beside the start time. Press B.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
START TIME
END TIME
CHANNEL
REC SPEED
7
Repeat the procedure in step 6 to set the recording's
end time.
8
Press o or p until the channel number appears beside
CHANNEL.Then, press B.
If you are using a standard antenna/Cable TV hookup (as
shown on page eight), select the channel of the TV program
you want to record.
If you are recording from other equipment, select L1 or L2.
To determine L1 or L2, refer to the Helpful Hint below.
If you are using a Cable Box/Satellite Receiver, select the
Cable Box/Satellite Receiver output channel (03 or 04).
Then, at the Cable Box/Satellite Receiver, select the channel
you want to record. Leave the Cable Box/Satellite Receiver
on for the timer recording.
Details are on page nine.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
START TIME
END TIME
CHANNEL
REC SPEED
3:37 PM Page 39
05 / 04 TUE
- - : - - - -
- - : - - - -
- -
- -
05 / 04 TUE
07 : 30 PM
- - : - - - -
- -
- -
AM
B PM
05 / 04 TUE
07 : 30 PM
08 : 30 PM
16
- -
Timer Recording (cont'd) 39
TIMER SET
SKIP/
CH
STOP
• Enter the information while the
space is flashing.
• To stop a started timer recording,
press STOP/EJECT
front of the System.
• If you are recording from other
equipment, set CHANNEL to L1 or
L2. If you connected the other
equipment to the AUDIO and
VIDEO In jacks on the front of the
System, choose L2. If you
connected the audio and video
cables to the AUDIO IN and
VIDEO IN jacks on the back of
the System, choose L1.
More Helpful Hints are on
page 80.
STANDBY-ON
SETUP/ AUDIO/
SUBTITLE ANGLE
PROG BAND
REC
DISPLAY ZOOM
C-RESET
SKIP/
CLEAR
CH
TITLE MODE/SPEED RETURN
TUNER
DVD VCR
DISC
5-8
OK
MENU
PLAY
REW FF
PAUSE
SLOW
1 2 3
VCR/TV
4 5 6
SEARCH MODE
7 8 9
REPEAT REPEAT
+10 0
A-B
SURROUND SOUND VOLUME
– +
PHILIPS
Helpful Hints
C A on the