Installation And Connection; Connection To The Power Supply - Bartscher IK 235Z Mode D'emploi

5.4 Installation and connection

Setting Up
o Unpack the induction cooker and remove all packing material.
o Place the device on a flat, safe surface which supports the weight and is not sensitive
to heat.
o Never place the device on a combustible surface (such as a tablecloth, etc.).
o Do not place the induction cooker near an open flame, electric ovens, heaters or
other heat sources.
Do not block or cover the ventilation opening which is utilised for the air supply and
o
exhaust from the device.
This can lead the device to overheat.
o Maintain a minimum distance of 5 - 10 cm away from combustible walls or other
objects.
o Do not place the device near appliances or items that are sensitive to magnetic fields
(e.g. radio, television, etc.).

Connection to the power supply

WARNING!
Electrical installation of the induction cooker should be carried out only by qualified
personnel with the appropriate approvals whilst maintaining law and specific
domestic and local regulations!
o The device is equipped with an electric cable. The electric cable must be connected
with the plug or plugged into the wall socket.
o Make the connection as depicted in the schematic diagram below:
gray
blue
brown
green-yellow
black
- 27 -