Installation And Connection - Bartscher IK 35SK Mode D'emploi

Unsuitable cookware
o pots/pans with a diameterof
less than 12 cm;
o ceramic, glass;
o stainless steel, aluminium, bronze or
copper unless, it is expressly marked
as suitable for induction;
o cookware with feet;
o vessels with round bottom.
CAUTION!
Please use only the cookware marked suitable for induction cooker.
If the induction hotplate detects too great a separation from the magnetizing
container, it will cause a reduction in power. This may cause the overheating
prevention device to malfunction. For this reason, do not use aluminum, bronze
or non-metallic containers.

5.4 Installation and connection

•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of
the device and is not heat sensitive.
•
Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).
•
Do not place the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Do not block or partially cover the ventilation opening allowing the inflow and outflow
of air to the device. This may cause the device to overheat. Keep the device a
minimum of 5 – 10 cm from walls and other objects.
•
Do not place the induction cooker next to devices or objects, which react sensitively
to magnetic fields (e.g. radios, TVs, cassette recorders, etc.).
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
The device should be placed in an area with easy access to the plug, in order to
quickly remove it from the socket if necessary.
- 27 -