Installation And Connection - Bartscher IK 30TC Mode D'emploi

For proper functioning, all pots and pans must have a plane magnetic bottom
(a magnet must stick to it). We recommend pans/pots with a diameter between
12 and 24 cm for better results.
e.g.
Induction cookware, 9-piece cooking pot set
chromium-nickel steel ● edge suitable for pouring ● cold handles
4 pots with lid
2.0 litres ● Ø 16 cm ● height 10.0 cm
2.7 litres ● Ø 18 cm ● height 11.0 cm
5.1 litres ● Ø 24 cm ● height 11.5 cm
6.1 litres ● Ø 20 cm ● height 20.0 cm
Bartscher order no. A130.442
Unsuitable cookware
o
pots/pans with a diameterof
less than 12 cm;
o
ceramic, glass;
o
stainless steel, aluminium, bronze or
copper unless, it is expressly marked
as suitable for induction;
o
cookware with feet;
o
vessels with round bottom.
CAUTION!
Please use only the cookware marked suitable for induction cooker.
If the induction hotplate detects too great a separation from the magnetizing
container, it will cause a reduction in power. This may cause the overheating
prevention device to malfunction. For this reason, do not use aluminum, bronze
or non-metallic containers.

5.4 Installation and connection


Discard the complete packing material after unpacking the device.

Place the device on top of an even and safe surface which supports the weight of
the device and is not heat sensitive.

Never place the device on a flammable surface.

Do not place the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
1 pan
2.8 litres ● Ø 24 cm ● height 6.5 cm
- 27 -