Safety Instructions - Bartscher IK 30TC Mode D'emploi


The device will detect if the appropriate cookware is placed on the heating plate.
If the cookware is not appropriate for induction hotplates, energy will not flow.
The device will turn off after approx. 30 seconds.

When operating the cooking zone with empty cookware, a temperature sensor turns
it off automatically.

5.2 Safety instructions

WARNING! Risk of electric shock!
The device must only be connected to a properly installed single socket with
protective contact.
Never remove the power cable by pulling the cable itself; always grab the plug
housing.

Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.

The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.

Never place the device or other objects on the power cable.

Do not lay the cable over carpets or heat insulations. Do not cover the cable.
Keep away the cable from operating range and do not dunk it into water.
WARNING! Hot external surface!
During operation some parts of the device become very hot. Do not touch the hot
surface of the glass field.
Please note: the induction cooker does not heat up itself during cooking, but the
temperature of the cookware heats up the cooking zone.

Do not use the device in case it does not function properly, has been damaged or
dropped.

Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
WARNING! Hazard via electrical current!
Do not insert any objects like wires or tools into the ventilation slots.
This may cause electric shocks.
- 25 -