Installation And Connection - Bartscher IK 20 Mode D'emploi

Unsuitable cookware
pots/pans with a diameterof
o
less than 12 cm;
ceramic, glass;
o
stainless steel, aluminium, bronze or
o
copper unless, it is expressly marked
as suitable for induction;
cookware with feet;
o
vessels with round bottom.
o
CAUTION!
Please use only the cookware marked suitable for induction cooker.
If the induction hotplate detects too great a separation from the magnetizing
container, it will cause a reduction in power. This may cause the overheating
prevention device to malfunction. For this reason, do not use aluminum, bronze or
non-metallic containers.

5.4 Installation and connection

o Discard the complete packing material after unpacking the device.
o Place the device on top of an even and safe surface which supports the weight of the
device and is not heat sensitive.
o NEVER place the device on a flammable surface (e.g. table cloth, carpet, etc.).
o Do not place the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
o Do not block or partially cover the ventilation opening allowing the inflow and outflow
of air to the unit. This may cause the unit to overheat. Keep the unit a minimum of
5 – 10 cm from walls and other objects.
o Do not place the induction cooker next to devices or objects, which react sensitively
to magnetic fields (e.g. radios, TVs, cassette recorders, etc.).
o The electrical circuit in the socket must be secured to at least 16A. Only connect the
unit directly to the wall socket; do not use any extension cords or power strips.
o The unit should be placed in an area with easy access to the plug, in order to quickly
remove it from the socket if necessary.
- 27 -