Bartscher IK 20 Mode D'emploi page 30

5.5 Operating
•
Insert the plug into an appropriate single outlet.
•
The readiness indicator will come on and an audio signal will sound The unit is now
in sensory mode.
•
Place the food in cookware in the middle of the heating zone.
•
To turn on the induction hotplate, press the On/Off button
The control light for power levels (
sound.
•
Next, press
1 time Power level „5" is selected, and the unit will come on.
(Levels: 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10).
The buttons
from 1 – 10.
Level 1 is equivalent to 1100 W, and level 10 is equivalent to 2000 W.
The LED display will show the selected power level.
2 times A temperature level of „120° C" is set and the unit will come on.
(Temperature levels: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240° C).
The buttons
within a range of 60 – 240° C at levels of 20° C. The LED display will show the
selected temperature.
The unit heats dishes and maintains constant temperature. Regulation of power
is thus performed automatically.
NOTE!
If the unit is turned on and no dish for cooking is present or is removed, a repeating
audio signal will sound and the unit will turn itself off after approx. 30 seconds.
Setting time
After selecting the desired mode (power level or temperature), press the button
marked . The number „0" will appear on the display and the LED time control light
will come on.
Using or you may set the time of operation in 5-minute intervals (max. 180
minutes). The time is counted down, and after several seconds the LED display returns
to previous displays.
- 28 -
.
or can be used at any moment to change the power level
or can be used at any moment to change the temperature
) will begin flashing and an audio signal will
.