Turning On The Device - Bartscher IK 235Z Mode D'emploi

Turning on the device

•
Before turning on the device, set both knobs in the OFF position ( „0" mark of the
knob positioned at the setting point).
•
Place an appropriate cooking pan in the middle of the selected cooking plate.
WARNING!
Never place an empty pan on the cooking plate.
Warming up an empty pan or frying pan activates the protection system against
overheating; an audio warning device signals and the device turns off.
On the digital display an error code „E2" will be displayed .
In such a case remove the pan from the cooking plate and leave the device for few
minutes to cool.
After that the device will operate without problems.
Setting of the power
•
Set the knob for the respective cooking plate at the selected output level (setting
range 1-10).
Front cooking plate
(knob on the right hand side)
800 W intermittent
1800 W
2000 W
2200 W
2400 W
2600 W
2800 W
3000 W
3200 W
3500 W
5000 W
NOTE!
This data may vary depending on the type of cooking pan used.
Rear cooking plate
(knob on the left hand side)
800 W intermittent
1800 W
2000 W
2200 W
2400 W
2600 W
2800 W
3000 W
3200 W
3500 W
2000 W
- 29 -