Instructions for installation and operation
Type
Spare part
Tipo
Pieza de recambio
Type
Pièce de rechange
Tipo
Peça de reposição
DM 10- ... C (type)-N
Filter element
Elemento de filtro
DM 20- ... C (type)-N
Élément filtrant
Elemento de filtra-
M 40- ... C (type)-N
D
Float drain
DM 10- ... C (type)-N
Purgador con flo-
DM 20- ... C (type)-N
Purgeur à flotteur
Dispositivo de des-
M 40- ... C (type)-N
D
carga flutuador
32
DRYPOINT DM 10-34 C-N, DM 10-41 C-N, DM 10-47 C-N, DM 20-48 C-N, DM 20-53 C-N, DM 20-60 C-N, DM 20-67 C-N,
Illustration
Representación
Représentation
Representação
gem
tador
5.2 Replacement of filter element
The filter element needs to be replaced
once a year. To do this, unscrew the lower
part of the housing, remove the spent fil-
ter element and replace it with a new one.
Hold the upper part of the housing while
unscrewing or screwing on the lower part
of the housing.
Dispose of the spent filter according to the
applicable statutory waste disposal regu-
lations. For instructions, see chapter 6.
Dismantling and disposal, page 32.
6. Dismantling and disposal
When dismantling the
DRYPOINT
membrane dryer, the process media and
the device components must be disposed
of separately.
Dispose of all media and components in a
safe manner and according to the applica-
ble statutory waste disposal regulations.
Spent filter element:
Waste code: 150203
Absorption and filter materials, disposable
wipes and protective clothing – with the
exception of those covered under 150202.
7. Spare parts and
accessories
Order No.
Número de pedido
The following spare parts and ac-
Référence
cessories are available for the
Nº de encomenda
DRYPOINT
4007268
4010849
4009150
4025537
DM 40-61 C-N, DM 40-75 C-N, DM 40-90 C-N
US-EN
CAUTION!
Danger to the environment!
M PLUS compressed air
®
M PLUS.
®