BH LK500R Guide D'utilisation page 16

STEP 5
Attach the Backrest Tube (I) onto the Rear Frame (B) with Flat End Hex Screws (K09) and
Spring Washers (K10). Then attach Seat-pad (J) and Backrest (H) onto the Backrest Tube (I)
and Rear Frame (B) with Truss Hex Screws (K11), Spring Washers (K10) and Flat Washers
(K12). Finally, attach the Backrest Decorative Cover (R) and tighten with Screws (K22).
J
R
H
I
16