High Power - JVC KD-ADV5580 Manuel D'instructions

Masquer les pouces Voir aussi pour KD-ADV5580:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Category Menu item
FADER *
7
Fader
BALANCE
Balance
LOUD
Loudness
VOL ADJUST
Volume adjust
BEEP
Key touch tone
AMP GAIN *
8
Amplifier gain
control
AM *
9
AM station
EXT IN *
*
10,
11
External input
AUX IN *
12
Auxiliary input
*
7
If you are using a two-speaker system, set the fader level to "00."
*
The volume level automatically changes to "VOLUME 30" if you change to "LOW POWER" with the volume level
8
set higher than "VOLUME 30."
*
9
Displayed only when any source other than "AM" is selected.
*
Displayed only when one of the following sources is selected—FM, AM, DISC, or AUX IN.
10
*
Not required for SIRIUS/XM tuners.
11
*
12
Displayed only when any source other than "AUX IN" is selected.
Selectable setting, [reference page]
R06 – F06
: Adjust the front and rear speaker output balance.
(Initial: 00)
L06 – R06
: Adjust the left and right speaker output balance.
(Initial: 00)
• LOUD OFF
: Cancels.
• LOUD ON
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
VOL ADJ –05
: Preset the volume adjustment level of each source (except
FM), compared to the FM volume level. The volume level
VOL ADJ +05
will automatically increase or decrease when you change
(Initial: VOL ADJ
the source.
00)
• Before making an adjustment, select the source you
want to adjust.
• "VOL ADJ FIX" appears on the display if "FM" is selected
as the source.
• BEEP OFF
: Deactivates the keypress tone.
• BEEP ON
: Activates the keypress tone.
• LOW POWER
: VOLUME 00 – VOLUME 30 (Select if the maximum power
of each speaker is less than 50 W to prevent damaging the
speaker.)

• HIGH POWER

: VOLUME 00 – VOLUME 50
• AM OFF
: Disable "AM" in source selection.
• AM ON
: Enable "AM" in source selection, [7].
• CH/IPOD
: To connect a JVC CD changer, [22], or an iPod, [25].
• EXT INPUT
: To connect a portable audio player to the CD changer jack,
[26].
• AUX OFF
: Disable "AUX IN" in source selection.
• AUX ON
: Enable "AUX IN" in source selection, [7].
SETTINGS
31

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kd-dv5500

Table des Matières