Basic Operations; Turning On The Power - JVC KD-SX8350 Manuel D'instructions

Turning on the power

1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To select the tuner, press FM AM
repeatedly.
To select CD, CD changer (or "LINE IN"*),
press CD CD-CH repeatedly.
(or LINE IN)*
* If "LINE IN" does not appear on the display,
see page 19 and select the external input
("LINE IN").
To select "AUX IN" (component connected
to the MP3 INPUT jack on the control
panel), press and hold CD CD-CH.
7 8
1 3
FM1 FM2
AM FM3
CD
CD-CH

BASIC OPERATIONS

9 9
MO 10 INT 11 RPT 12 RND
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 14 – 16.)
To drop the volume in a moment
Press
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press
"SEE YOU" appears, then the unit turns off.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 17.
2
To increase the volume.
To decrease the volume.
Volume level appears.
Volume or audio
level (see page 19)
indicator
briefly while listening to any
for more than one second.
7