JVC KD-ADV5580 Manuel D'instructions page 41

Symptom
• Disc cannot be played back.
• Noise is generated.
• Tracks cannot play back as you have intended
them to play.
• Longer readout time is required.
• No sound can be heard when picture is
displayed while playing a MPEG Video file.
• Elapsed playing time is not correct.
• "PLEASE" and "EJECT" appear alternately on
the display.
• Correct characters are not displayed (e.g.
album name).
• "NO DISC" appears on the display.
• "NO MAGAZINE" appears on the display.
• "RESET 8" appears on the display.
• "RESET 1" – "RESET 7" appears on the display. Press the reset button of the CD changer.
• The CD changer does not work at all.
Remedy/Cause
• Change the disc.
• Record the tracks using a compliant application in
the appropriate discs (see page 6).
• Add the extension code <.mpg>, <.mpeg>,
<.mp3>, <.wma>, or <.wav> to the file names.
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Readout time varies due to the complexity of the
folder/file configuration. Do not use too many
hierarchies and folders.
Record the audio track using MPEG1 Audio Layer 2 as
the audio stream for MPEG Video files.
This sometimes occurs during playback. This is caused
by how the tracks are recorded.
Insert a disc that contains tracks of appropriate formats.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and
press the reset button of the CD changer.
Reset the unit (see page 3).
Continued on the next page
REFERENCES 41